Proper use of electric bicycle batteries can extend battery life

1. When an electric vehicle is on the bridge, climbing a hill or driving against the wind, it should be driven by human power to prevent the battery power supply current from suddenly increasing.
2. When you first get on the car or ride again after emergency braking to stop the speed while driving, it is best to pedal a few times and wait for the electric car to reach a certain speed before starting electric riding. Try not to use electric power to start the electric vehicle directly when it is stationary.
3. When riding, if you need to accelerate, you should slowly rotate the speed control handle to avoid directly accelerating to the fastest gear. Because not only will this not increase the vehicle speed immediately, but it will also generate an inrush current and cause damage to the battery. When road conditions permit, drive the electric vehicle at the highest speed possible.
4. When riding, try to avoid frequent braking and starting, and use pedals more often when the road is congested. This not only increases the "continuity range" and improves battery usage efficiency, but also extends the battery life.
5. Charge frequently so that the battery is always fully charged. If possible, it should be charged as needed, but the total charging time should be grasped.
6. If it is not going to be used for a long time, the battery should be stored fully charged and recharged regularly (1 month).
7. The battery shows that the battery is dead. After a while, it is found that the battery has a small amount of voltage, which is called "recovery voltage". Do not drive using this "rebound voltage".